IKO enertherm insulation has the highest performance per m². This means that a higher insulation value is achieved with a thinner board thickness than with other insulation materials (such as EPS, XPS and mineral wool). With IKO enertherm, you therefore make optimum use of the space available on the roof, in the floor or in the cavity.

At around 32 kg/m³, IKO enertherm is a lightweight insulation. This generates ergonomic benefits in the handling of the material.

Better mechanical properties are achieved than with coarser foam because of the fine cell structure. This makes the insulation boards dimensionally stable and the insulating capacity is retained for years.

IKO enertherm insulation achieves a fire classification of B class s2, d0 (end use). The board produces very little smoke and does not melt or drip. The fire retardant properties are characteristic of the chemical structure

IKO enertherm has very low water absorption and is rot- and mould-proof. As a result, the insulation value is retained under all conditions.

The thinner board thickness of IKO enertherm for the same insulation value compared with other materials means a more limited volume of insulation boards is needed, resulting in lower transport costs.